PR1MERO PRO FLEXIBLE JOINT COMPOUND
is a high quality flexible compound used as a total jointing system for walls and ceilings made of hardiflex, gypsum boards, building boards, plywood, and other building materials. It minimizes and eliminates joint cracks induced by structural movement, expansion and contraction of building materials.

IDEAL FOR:
• Walls
• Ceilings

BENEFITS:
Reduces cracks on wall
and ceiling joints
Excellent adhesion
Fast drying
Easy application
Ready to use
water-based formula
Low odor
Elastic when dry
Low shrinkage

AVAILABLE SIZE:
1.5 kg. & 5 kg.

APPLICATION FOR WALL AND CEILING JOINTS:
Using a metal spreader, apply a thin layer of Primero Pro Flexible Joint Compound into the seam, pressing firmly to prevent air sockets. Spread compound along the seams to make a smooth surface. Let dry for 15 to 30 minutes, 1 hour if seams are deep. After first layer has dried, apply second coat along the seams in a long, smooth stroke. Make sure that edges are smooth and there are no lines or streaks on the compound. This is to minimize sanding and produces better painting results.

APPLICATION WITH MESH TAPE:
Apply a thin layer of Primero Pro Flexible Joint Compound along the seams about 1.5” to 2” wide on each side of the board. Immediately apply 2” mesh tape and press down onto the joint. Make sure that mesh tape is flat on the wall. Let dry for 30 to 60 minutes. Apply second coat of flexible joint compound to cover the mesh tape. Smoothen edges to minimize sanding. Let dry for 3 to 4 hours. Sand lightly with grit 150 or 180 sandpaper. Then apply desired paint.

For overnight or long term storage, fill tub with clean water to cover compound. When ready to use, discard water, mix with mixing paddle until homogenous.

COVERAGE:
1 kg = 1  to 1.5 sq. meter per mm.

PRIMERO PRO FLEXIBLE

JOINT COMPOUND

PR1MERO PRO FLEXIBLE JOINT COMPOUND
is a high quality flexible compound used as a total jointing system for walls and ceilings made of hardiflex, gypsum boards, building boards, plywood, and other building materials. It minimizes and eliminates joint cracks induced by structural movement, expansion and contraction of building materials.

IDEAL FOR:
• Walls
• Ceilings

BENEFITS:
Reduces cracks on wall
and ceiling joints
Excellent adhesion
Fast drying
Easy application
Ready to use
water-based formula
Low odor
Elastic when dry
Low shrinkage

AVAILABLE SIZE:
1.5 kg. & 5 kg.

APPLICATION FOR WALL AND CEILING JOINTS:
Using a metal spreader, apply a thin layer of Primero Pro Flexible Joint Compound into the seam, pressing firmly to prevent air sockets. Spread compound along the seams to make a smooth surface. Let dry for 15 to 30 minutes, 1 hour if seams are deep. After first layer has dried, apply second coat along the seams in a long, smooth stroke. Make sure that edges are smooth and there are no lines or streaks on the compound. This is to minimize sanding and produces better painting results.

APPLICATION WITH MESH TAPE:
Apply a thin layer of Primero Pro Flexible Joint Compound along the seams about 1.5” to 2” wide on each side of the board. Immediately apply 2” mesh tape and press down onto the joint. Make sure that mesh tape is flat on the wall. Let dry for 30 to 60 minutes. Apply second coat of flexible joint compound to cover the mesh tape. Smoothen edges to minimize sanding. Let dry for 3 to 4 hours. Sand lightly with grit 150 or 180 sandpaper. Then apply desired paint.

For overnight or long term storage, fill tub with clean water to cover compound. When ready to use, discard water, mix with mixing paddle until homogenous.

COVERAGE:
1 kg = 1  to 1.5 sq. meter per mm.