PYE GROUT
WATERPROOF TILE GROUT
PACKING: 1KG
PYE GROUT is a protective waterproof dense cement mixture used to fill the joints of mosaic, ceramic and other similar tiles. When mixed with water, it produces a smooth non-shrinking hard joint. It provides an attractive appearance and prevents the ingress of water behind the tiling surface. It is resistant to fungus and mould growth.
Suitable for:
- Use in the tiled areas of kitchesn, shower recesses toilets, walls and floors. It is suitable for both interior and exterior use.
Product Characteristics:
| Colour | :White, Grey |
| Adhesion | :Excellent adhesion to concrete |
| Drying time | :1 – 2 hours under normal conditions |
| Coverage | :Approx. 2 sq. m. of tiles per kg |
| Shrinkage | :Will not shrink or crack when used in accordance with instructions. |
| Durability | Unaffected by chlorine and is resistant to algae growth |
| Cleaning | :Clean all equipment with water before setting occurs |
Directions for Use:
Surface Preparation
Allow the tile adhesive to cure for 24 hours before grouting. On non-porous backings, the time interval should be extended to a minimum of 3 days. Fro exterior work, it is important that water is not allowed to penetrate the open joints before grouting commences.
Mixing
Add sufficient water and mix to a thick uniform, creamy consistency. Allow to stand for 5 – 10 minutes and re-stir before use.
Application:
– Grout tiles after the adhesives has had sufficient time to set.
– Dampen the tile joint with a sponge and apply the prepared grout, spreading at he rate of 3m at a time.
– Work well into joints with a sponge, grouting tools or squeegee.
– Remove surplus grout with a piece of damp cloth or sponge
– Allow grout to set firm (approximately one day).
PYE GROUT
WATERPROOF TILE GROUT
Packing: 1kg
PYE GROUT is a protective waterproof dense cement mixture used to fill the joints of mosaic, ceramic and other similar tiles. When mixed with water, it produces a smooth non-shrinking hard joint. It provides an attractive appearance and prevents the ingress of water behind the tiling surface. It is resistant to fungus and mould growth.
Suitable for:
- Use in the tiled areas of kitchesn, shower recesses toilets, walls and floors. It is suitable for both interior and exterior use.
Product Characteristics:
| Colour | :White, Grey |
| Adhesion | :Excellent adhesion to concrete |
| Drying time | :1 – 2 hours under normal conditions |
| Coverage | :Approx. 2 sq. m. of tiles per kg |
| Shrinkage | :Will not shrink or crack when used in accordance with instructions. |
| Durability | Unaffected by chlorine and is resistant to algae growth |
| Cleaning | :Clean all equipment with water before setting occurs |
Directions for Use:
Surface Preparation
Allow the tile adhesive to cure for 24 hours before grouting. On non-porous backings, the time interval should be extended to a minimum of 3 days. Fro exterior work, it is important that water is not allowed to penetrate the open joints before grouting commences.
Mixing
Add sufficient water and mix to a thick uniform, creamy consistency. Allow to stand for 5 – 10 minutes and re-stir before use.
Application:
– Grout tiles after the adhesives has had sufficient time to set.
– Dampen the tile joint with a sponge and apply the prepared grout, spreading at he rate of 3m at a time.
– Work well into joints with a sponge, grouting tools or squeegee.
– Remove surplus grout with a piece of damp cloth or sponge
– Allow grout to set firm (approximately one day).