PYE SLATE SEAL
CLEAR PROTECTING ACRYLIC SEALER
PACKING: 1L | 5L
PYE SLATE SEAL is a specially formulated colourless protecting coating with added Ultra Violet (UV) additive for treatment of interior and exterior cementitives and concrete surfaces against scratching. Ideally, suited for slate, quarry and paver tile, flagstone stamped concrete and concrete tile.
Suitable for:
- PYE SLATE SEAL is suitable for all kind of concrete bricks, slates, paves, stone, terracotta tiles and cementitious substrate.
Product Characteristics:
| Colour | :Colourless |
| Form | :Liquid |
| Odour | :Solvent odour |
| Adhesion | :Excellent adhesion to clean dry and sound surfaces. |
| Drying time | :Allow 4 hours between coats |
| Coverage | :Approx. 7 – 10 sq.m per litre. |
| Safety | :Non-hazardous |
| Cleaning | :Clean tools and equipment with white spirits after use. |
Packing:
1lit, 5lit & 20lit
Directions for Use:
Surface Preparation
Ensure surfaces are clean, dry and free from dirt, grease, efflorescence (a whitish substance) that can prevent absorption of the sealer. Any organic growth such as fungi or algae should be treated first with PYE FUNGIRID. Repair chip off or concrete surfaces and allow drying before treated. New concrete surface should cure for at least 28 days.
Application
Using brush, roller or low-pressure air spray. Apply evenly on all dry dust free surfaces. For normal application 2 coats are sufficient. However 3 coats may be required for heavy-duty driveway.
NOTE:
PYE SLATE SEAL cannot be applied to wet or dam surfaces.
PYE SLATE SEAL
CLEAR PROTECTING ACRYLIC SEALER
PACKING: 1L | 5L
PYE SLATE-SEAL is a specially formulated colourless protecting coating with added Ultra Violet (UV) additive for treatment of interior and exterior cementitives and concrete surfaces against scratching. Ideally, suited for slate, quarry and paver tile, flagstone stamped concrete and concrete tile.
Suitable for:
- PYE SLATE-SEAL is suitable for all kind of concrete bricks, slates, paves, stone, terracotta tiles and cementitious substrate.
Product Characteristics:
| Colour | :Colourless |
| Form | :Liquid |
| Odour | :Solvent odour |
| Adhesion | :Excellent adhesion to clean dry and sound surfaces. |
| Drying time | :Allow 4 hours between coats |
| Coverage | :Approx. 7 – 10 sq.m per litre. |
| Safety | :Non-hazardous |
| Cleaning | :Clean tools and equipment with white spirits after use. |
Packing:
1lit, 5lit & 20lit
Directions for Use:
Surface Preparation
Ensure surfaces are clean, dry and free from dirt, grease, efflorescence (a whitish substance) that can prevent absorption of the sealer. Any organic growth such as fungi or algae should be treated first with PYE FUNGIRID. Repair chip off or concrete surfaces and allow drying before treated. New concrete surface should cure for at least 28 days.
Application
Using brush, roller or low-pressure air spray. Apply evenly on all dry dust free surfaces. For normal application 2 coats are sufficient. However 3 coats may be required for heavy-duty driveway.
NOTE:
PYE SLATE SEAL cannot be applied to wet or dam surfaces.