RJ LONDON WALL PUTTY is a high quality Acrylic Copolymer Emulsion putty suitable for interior and exterior applications. It is widely used premium putty,particularly in constructions and projects where fine smooth and excellent finish are required.
RJ Wall Putty is recommended for new and old surfaces, suitable for filling cracks, joints, levelling up uneven rough surfaces such as concrete, cement walls, ceiling, asbestos boards, brick structures, kapok boards, wooden furniture and doors.
BENEFITS:
โReady to use
โHas good adhesion
โFast drying
โSilky smooth finish
โNo need to use primer
โUse directly on concrete even without primer
โWater based
โPleasant smell
โResistant to fungus
โTintable latex based tinting color
AVAILABLE SIZE:
0,5 kg, 1 kg, 5 kg, 25 kg plastic container
APPLICATIONS
Surface Preparation:
Ensure the surface is clean, dry, free of grease, oil, fungus, and other impurities. Moisture content of surface should be below 8% and pH value below 9.5. Remove old peeling paint works before applications.
DIRECTIONS FOR USE
1. Stir thoroughly before use. If putty is too thick, add clean water max 10% (if necessary) and stir well
2. For optimum result, apply RJ WALL PUTTY in several thin coat than one heavy coat
3. Allow putty to dry. Drying time in normal temperature between 20? ? 30?C :
– Touch dry : 15 minutes
– Hard dry : 2 hours
– Reapplication interval : 2 hours (only if required)
– Sanding after 4 hours (use sanding paper no. 150 ? 360)
4. Apply paint works
TOOLS
Use plastic / metal trowel
COVERAGE
Recommended coverage approx. 1 ? 3 m2 per kg for two coats
RJ WALL PUTTY
RJ LONDON WALL PUTTY is a high quality Acrylic Copolymer Emulsion putty suitable for interior and exterior applications. It is widely used premium putty,particularly in constructions and projects where fine smooth and excellent finish are required.
RJ Wall Putty is recommended for new and old surfaces, suitable for filling cracks, joints, levelling up uneven rough surfaces such as concrete, cement walls, ceiling, asbestos boards, brick structures, kapok boards, wooden furniture and doors.
BENEFITS:
โReady to use
โHas good adhesion
โFast drying
โSilky smooth finish
โNo need to use primer
โUse directly on concrete even without primer
โWater based
โPleasant smell
โResistant to fungus
โTintable latex based tinting color
AVAILABLE SIZE:
0,5 kg, 1 kg, 5 kg, 25 kg plastic container
APPLICATIONS
Surface Preparation:
Ensure the surface is clean, dry, free of grease, oil, fungus, and other impurities. Moisture content of surface should be below 8% and pH value below 9.5. Remove old peeling paint works before applications.
DIRECTIONS FOR USE
1. Stir thoroughly before use. If putty is too thick, add clean water max 10% (if necessary) and stir well
2. For optimum result, apply RJ WALL PUTTY in several thin coat than one heavy coat
3. Allow putty to dry. Drying time in normal temperature between 20? ? 30?C :
– Touch dry : 15 minutes
– Hard dry : 2 hours
– Reapplication interval : 2 hours (only if required)
– Sanding after 4 hours (use sanding paper no. 150 ? 360)
4. Apply paint works
TOOLS
Use plastic / metal trowel
COVERAGE
Recommended coverage approx. 1 ? 3 m2 per kg for two coats