BRONCO POLYESTER BODY FILLER
is an impact and shock resistant polyester putty especially designed for use on auto-body for patching of dents, leaks, holes and flaws. When mixed with hardener and applied, it has excellent flexibility, adhesion, hardness, heat resistance and sanding properties.
IDEAL FOR:
• Furniture
• Walls
• Cars
• Boats
BENEFITS:
✔Impact and Shock Resistant
✔Can be Sanded
✔Excellent Flexibility
AVAILABLE SIZE:
1Kg & 4Kg
MIXING
Mix filler thoroughly from bottom up. Knead cream hardener tube thoroughly before using. Place desired amount of BRONCO Polyester Body Filler on clean, flat, non-porous surface, such as glass, metal or plastic tray. Each tube of cream hardener is enough for the entire can of BRONCO Polyester Body Filler. Use the following ratio: 1I4 tube hardener to 1/4 can plastic filler. Mix thoroughly using plastic spreader or putty knife to uniform color. Mix with firm pressure using smooth back and forth wiping motion. MIX ONLY IN SMALL AMOUNTS THAT CAN BE USED IN 3 TO 4 MINUTES. DO NOT MIX CREAM HARDENER IN THE BODY FILLER CONTAINER.
APPLICATION
Spread initial thin layer of mixed filler over surface, using firm pressure to assure maximum adhesion. Work up thickness and overlap edges of damaged area. Smooth to contour. To fill dents, do not apply the filler too thick; its better to apply in two steps. DO NOT PUT UNUSED MIXED MATERIALS BACK IN CAN. DO NOT USE MIXING TOOL TO REMOVE FROM PLASTIC CAN.
BRONCO POLYESTER
BODY FILLER
BRONCO POLYESTER BODY FILLER
is an impact and shock resistant polyester putty especially designed for use on auto-body for patching of dents, leaks, holes and flaws. When mixed with hardener and applied, it has excellent flexibility, adhesion, hardness, heat resistance and sanding properties.
IDEAL FOR:
• Furniture
• Walls
• Cars
• Boats
BENEFITS:
✔Impact and Shock Resistant
✔Can be Sanded
✔Excellent Flexibility
AVAILABLE SIZE:
1Kg & 4Kg
MIXING
Mix filler thoroughly from bottom up. Knead cream hardener tube thoroughly before using. Place desired amount of BRONCO Polyester Body Filler on clean, flat, non-porous surface, such as glass, metal or plastic tray. Each tube of cream hardener is enough for the entire can of BRONCO Polyester Body Filler. Use the following ratio: 1I4 tube hardener to 1/4 can plastic filler. Mix thoroughly using plastic spreader or putty knife to uniform color. Mix with firm pressure using smooth back and forth wiping motion. MIX ONLY IN SMALL AMOUNTS THAT CAN BE USED IN 3 TO 4 MINUTES. DO NOT MIX CREAM HARDENER IN THE BODY FILLER CONTAINER.
APPLICATION
Spread initial thin layer of mixed filler over surface, using firm pressure to assure maximum adhesion. Work up thickness and overlap edges of damaged area. Smooth to contour. To fill dents, do not apply the filler too thick; its better to apply in two steps. DO NOT PUT UNUSED MIXED MATERIALS BACK IN CAN. DO NOT USE MIXING TOOL TO REMOVE FROM PLASTIC CAN.