BRONCO RUST CONVERTER
Is an active pre-treatment solution intended to condition rusty steel surfaces. It converts the rust on the steel surface into a insoluble and stable salt of phosphoric acid, creating a grayish black color on the treated metal surface.
IDEAL FOR:
• Roofs
• Trusses
AVAILABLE SIZE:
1 Liter & 4 Liters
APPLICATION:
Remove any loose or flaking rust with steel brush or grit 80 sand paper. Apply by nylon brush until rusty metal surface is fully wet.
Allow to dry for 2 hours. Wipe off any residue with a dry cloth or scrub pad from the surface.
Apply one to two coats Bronco Metal Primer before applying top coat paint, quick drying enamel or other solvent based paint.
COVERAGE:
25-30 m2/4liters @ 50 microns D.F.T.
BRONCO RUST CONVERTER
BRONCO RUST CONVERTER
Is an active pre-treatment solution intended to condition rusty steel surfaces. It converts the rust on the steel surface into a insoluble and stable salt of phosphoric acid, creating a grayish black color on the treated metal surface.
IDEAL FOR:
• Roofs
• Trusses
AVAILABLE SIZE:
1 Liter & 4 Liters
APPLICATION:
Remove any loose or flaking rust with steel brush or grit 80 sand paper. Apply by nylon brush until rusty metal surface is fully wet.
Allow to dry for 2 hours. Wipe off any residue with a dry cloth or scrub pad from the surface.
Apply one to two coats Bronco Metal Primer before applying top coat paint, quick drying enamel or other solvent based paint.
COVERAGE:
25-30 m2/4liters @ 50 microns D.F.T.