BRONCO NON-TOXIC EPOXY PRIMER
is a two component rust-inhibitive primer that uses a non-toxic, corrosion-inhibiting aluminum triphosphate pigment. It is lead-free but provides the same anti-corrosive property of leaded and zinc chromate pigments. It is formulated to give emphasis on the need for an environmentally safe primer for various industrial and household applications.
IDEAL FOR:
• Storage Tanks
• Cars
• Trusses
• Gates
• G.I. Sheets
• Re-bars
• I-beams
• Banisters
• Steel Windows
AVAILABLE SIZE:
3 liter, set with catalyst
MIXING
Pour all contents of catalyst into Bronco Non-Toxic Epoxy Primer. Mix product well before using. Scrape bottom of can for settled pigment with a plastic or wooden stirrer. You may also use a stirring rod at slow speed. Do not over mix as it may introduce air bubbles into the paint
REDUCER
Bronco Epoxy Reducer
DIRECTIONS FOR USE
Apply 1 to 2 coats of Bronco Non-Toxic Epoxy Primer allowing 4 to 6 hours to recoat. Allow to dry overnight before applying desired top coats such as automotive lacquers, epoxy enamels, or Bronco Rubberized Floor Coat.
INDUCTION AND DRYING TIME
Allow 15 minutes induction time before applying paint.
COVERAGE
20 to 25 sq.m / 4 liters per coat
BRONCO NON-TOXIC
EPOXY PRIMER
BRONCO NON-TOXIC EPOXY PRIMER
is a two component rust-inhibitive primer that uses a non-toxic, corrosion-inhibiting aluminum triphosphate pigment. It is lead-free but provides the same anti-corrosive property of leaded and zinc chromate pigments. It is formulated to give emphasis on the need for an environmentally safe primer for various industrial and household applications.
IDEAL FOR:
• Storage Tanks
• Cars
• Trusses
• Gates
• G.I. Sheets
• Re-bars
• I-beams
• Banisters
• Steel Windows
AVAILABLE SIZE:
3 liter, set with catalyst
MIXING
Pour all contents of catalyst into Bronco Non-Toxic Epoxy Primer. Mix product well before using. Scrape bottom of can for settled pigment with a plastic or wooden stirrer. You may also use a stirring rod at slow speed. Do not over mix as it may introduce air bubbles into the paint
REDUCER
Bronco Epoxy Reducer
DIRECTIONS FOR USE
Apply 1 to 2 coats of Bronco Non-Toxic Epoxy Primer allowing 4 to 6 hours to recoat. Allow to dry overnight before applying desired top coats such as automotive lacquers, epoxy enamels, or Bronco Rubberized Floor Coat.
INDUCTION AND DRYING TIME
Allow 15 minutes induction time before applying paint.
COVERAGE
20 to 25 sq.m / 4 liters per coat