PRIMERO AGENT Q5
THE BONDING ADDITIVE
PR1MERO AGENT Q5 BOND
is a specially formulated acrylic based bonding agent to improve bonding and adhesion strength of tile adhesive or cement-sand screed. It increases flexural strength of medium and large tiles to reduce debonding of tiles.
IDEAL FOR:
• Wall and Floor Tiles
• Engineered Stones
• Bricks
• Marble
• Granite and other Natural Stones
BENEFITS:
✔Increase Adhesion
✔Non-corrosive
✔Inrease Flexural And Tensile Strength
AVAILABLE SIZE:
4 Liters
MIXING
Shake well before using.
APPLICATION
Using a pail or flat clean surface, add approximately 1 part water to 2 parts tile adhesive. (.75 to 1 liter water for every 2 kilos of tile adhesive) Mix well to make a thick mortar. Add 2 liters of Primero Agent Q5 Bond for every 20 to 25kg bag of tile adhesive for small to medium tiles. Mix well to achieve a creamy consistency. Apply to tiles in 3 to 5mm thickness.
For very large tiles (60cm x 60cm) and high traffic areas, add 4 liters to the same water and tile adhesive mixture as above. Mix well and apply tiles at thickness of 3 to 5mm using a notched trowel.
Firmly press tiles into position and allow to dry for 3 to 4 hours
PRIMERO AGENT Q5
THE BONDING ADDITIVE
PR1MERO AGENT Q5 BOND
is a specially formulated acrylic based bonding agent to improve bonding and adhesion strength of tile adhesive or cement-sand screed. It increases flexural strength of medium and large tiles to reduce debonding of tiles.
IDEAL FOR:
• Wall and Floor Tiles
• Engineered Stones
• Bricks
• Marble
• Granite and other Natural Stones
BENEFITS:
✔Increase Adhesion
✔Non-corrosive
✔Inrease Flexural And Tensile Strength
AVAILABLE SIZE:
4 Liters
MIXING
Shake well before using.
APPLICATION
Using a pail or flat clean surface, add approximately 1 part water to 2 parts tile adhesive. (.75 to 1 liter water for every 2 kilos of tile adhesive) Mix well to make a thick mortar. Add 2 liters of Primero Agent Q5 Bond for every 20 to 25kg bag of tile adhesive for small to medium tiles. Mix well to achieve a creamy consistency. Apply to tiles in 3 to 5mm thickness.
For very large tiles (60cm x 60cm) and high traffic areas, add 4 liters to the same water and tile adhesive mixture as above. Mix well and apply tiles at thickness of 3 to 5mm using a notched trowel.
Firmly press tiles into position and allow to dry for 3 to 4 hours