PRIMERO MULTI-SEAL
ELASTOMERIC WATERPROOFING
PR1MERO MULTI-SEAL ELASTOMERIC WATERPROOFING SEALANT
is specially designed to seal hairline cracks, seals nail holes and waterproofing firewalls and decks
AVAILABLE COLORS:
• Green
• Red
• Gray
• Cosmic Sand
• Powder Beige
• Coffee Cream
• Empire Blue
• Bronco Brown
• Sahara Yellow
• Pale Gray
• Pine Green
• Clay Red
• Machine Gray
• Koko Brown
• Clear
• Black
• White
IDEAL FOR:
• Roofs
• Firewalls
• Cracks
• Downspouts
• Gutters
BENEFITS:
✔Flexible
✔Ready to Use
✔Durable Coating
✔Long Shelf Life
✔Crack Resistant
✔U.V. Resistant
AVAILABLE SIZE:
200 g., 600 g., 4 kg., 20 kg.,
APPLICATION:
Product is ready to use. No thinning is necessary. HOWEVER, you may add a maximum of 5% clean water to help smoothen brush strokes. PRE STRIPE MULTI SEAL ON CORNERS, EDGES AND AREAS WITH CRACKS. LET DRY. Apply FIRST COAT OF Pr1mero Multi-Seal vertically. Let dry for 1 to 2 hours. Apply second coat horizontally. It is best to apply two thin coats rather than one thick coating to aid in dying of sealant. For severe cracks on walls that are non-
Structural, you may use Pr1mero Waterproofing Fiber Cloth immediately after the first coat while it is wet. Dab cloth with brush onto wet sealant. Smoothen the Fiber Cloth before it dries, pushing air bubbles out from fiber cloth. Let dry then Apply second coat or third coat if necessary.
FOR WATERPROOFI NG OF ROOF DECKS, and BALCONIES:
Drying time will be longer in enclosed areas such as bathrooms and underground tanks. Make sure area is well- ventilated. A PPLY third coat if area is subject to heavy load or if machines like air handling units, pumps or exhaust fans are near. Top at least 1-inch thick cement topping for balconies with heavy foot traffic.
SINGLE COAT:
– 8 to 10 sq. m per 4 kg.
– 40 to 50 sq. m per 20 kg.
2 COATS:
– 4 to 5 sq. m per 4 kg.
– 20 to 25 sq. m per 20 kg
PRIMERO
MULTI-SEAL
ELASTOMERIC WATERPROOFING
PR1MERO MULTI-SEAL ELASTOMERIC WATERPROOFING SEALANT
is specially designed to seal hairline cracks, seals nail holes and waterproofing firewalls and decks
AVAILABLE COLORS:
• Green
• Red
• Gray
• Cosmic Sand
• Powder Beige
• Coffee Cream
• Empire Blue
• Bronco Brown
• Sahara Yellow
• Pale Gray
• Pine Green
• Clay Red
• Machine Gray
• Koko Brown
• Clear
• Black
• White
IDEAL FOR:
• Roofs
• Firewalls
• Cracks
• Downspouts
• Gutters
BENEFITS:
✔Flexible
✔Ready to Use
✔Durable Coating
✔Long Shelf Life
✔Crack Resistant
✔U.V. Resistant
AVAILABLE SIZE:
200 g., 600 g., 4 kg., 20 kg.,
APPLICATION:
Product is ready to use. No thinning is necessary. HOWEVER, you may add a maximum of 5% clean water to help smoothen brush strokes. PRE STRIPE MULTI SEAL ON CORNERS, EDGES AND AREAS WITH CRACKS. LET DRY. Apply FIRST COAT OF Pr1mero Multi-Seal vertically. Let dry for 1 to 2 hours. Apply second coat horizontally. It is best to apply two thin coats rather than one thick coating to aid in dying of sealant. For severe cracks on walls that are non-
Structural, you may use Pr1mero Waterproofing Fiber Cloth immediately after the first coat while it is wet. Dab cloth with brush onto wet sealant. Smoothen the Fiber Cloth before it dries, pushing air bubbles out from fiber cloth. Let dry then Apply second coat or third coat if necessary.
FOR WATERPROOFI NG OF ROOF DECKS, and BALCONIES:
Drying time will be longer in enclosed areas such as bathrooms and underground tanks. Make sure area is well- ventilated. A PPLY third coat if area is subject to heavy load or if machines like air handling units, pumps or exhaust fans are near. Top at least 1-inch thick cement topping for balconies with heavy foot traffic.
SINGLE COAT:
– 8 to 10 sq. m per 4 kg.
– 40 to 50 sq. m per 20 kg.
2 COATS:
– 4 to 5 sq. m per 4 kg.
– 20 to 25 sq. m per 20 kg