APPLICATION:
Mark an area of 12 sq. meters for a 20 kg. Pail or a 2.5 sq. meters area for every 4 kilos. Pour Prime­ro Pro Bitumen straight from the can and spread on surface until the entire surface is covered. Repeat procedure until area to be waterproofed is covered. Allow Bitumen to overlap at least 2 inches. Allow to dry overnight. Protect from direct rain, dirt and dust for 12 hours.

To use with fiberglass mesh:
Pre-stripe the area and apply a layer of Bitumen on the marked area. While wet, lay down the fiberglass mesh and flatten onto wet Bitumen. Make sure that the mesh is covered. Pour the rest of the content of pail or can onto marked area and use a plastic or rubber towel to spread Bitumen evenly.

To use as topping:
Apply a 2 inches slab topping to protect Bitumen from foot traffic and any other elements.

To use in metal surfaces:
All metal must be clean and primed with epoxy primer or zinc chromate primer.

DRYING TIME:
4 to 5 hours touch dry
24 hours foot trafficable
7 days full cure