PRIMERO PRO DECK
WATERPROOFING MEMBRANE
PR1MERO PRO DECK WATERPROOFING MEMBRANE
is a professional grade, single component acrylic styrene polymer that is foot trafficable. It is used to seal and waterproof interior and exterior concrete, metal urfaces, fiber cement boards and other building materials.
AVAILABLE COLORS:
• Gray
• Red
• Green
IDEAL FOR:
• Roof deck
• Concrete slabs
• Balconies
• Parapet walls
• Firewalls
• Terraces
BENEFITS:
✔Flexible seamless membrane
✔Very elastic
✔High tensile strength
✔Foot trafficable
✔U.V. resistant
AVAILABLE SIZE:
4 kg. & 25 kg.
APPLICATION:
Apply 1 coat of Primero Pro-Deck horizontally. If paint is too thick, you may add up to 25% water to make paint into primer. Let it dry for 2 to 3 hours before recoating. Apply 1 coat vertically. Let it dry then apply second coat horizontally.
For areas with substantial movement such as roof decks with (AHU) or other machinery, apply with waterproofing fiber cloth. Apply 1 coat of Primero Pro Deck vertically. While still wet, lay fiber cloth into the paint. Use the brush to push fiber cloth firmly onto the paint, squeezing out air bubbles to eliminate creases. Let it dry for 2 to 3 hours then reapply second coat horizontally. You may apply a third coat vertically for better coverage and protection. It is recommended to apply 1 to 2 square meters at a time so that paint will not dry while applying fiber cloth. This will increase tensile strength. Allow 12 to 24 hours for foot traffic and 3 days for full cure.
For old walls, remove any loose or flaking paint. Sand surface to rid of efflorescence and apply wall putty or new cement plaster for areas with deep cracks. Let it dry and apply Primero Pro-Deck with the same instructions above.
DRYING TIME:
3 to 4 hours to recoat
12 to 24 hours hard dry
2 to 3 days for full cure
COVERAGE:
4kg: 4-5 sq. meters (2 coats)
25kg: 25-28 sq. meters (2 coats)
1kg/sq. meter (2 coats)
PRIMERO PRO DECK
WATERPROOFING MEMBRANE
PR1MERO PRO DECK WATERPROOFING MEMBRANE
is a professional grade, single component acrylic styrene polymer that is foot trafficable. It is used to seal and waterproof interior and exterior concrete, metal urfaces, fiber cement boards and other building materials.
AVAILABLE COLORS:
• Gray
• Red
• Green
IDEAL FOR:
• Roof deck
• Concrete slabs
• Balconies
• Parapet walls
• Firewalls
• Terraces
BENEFITS:
✔Flexible seamless membrane
✔Very elastic
✔High tensile strength
✔Foot trafficable
✔U.V. resistant
AVAILABLE SIZE:
4 kg. & 25 kg.
APPLICATION:
Apply 1 coat of Primero Pro-Deck horizontally. If paint is too thick, you may add up to 25% water to make paint into primer. Let it dry for 2 to 3 hours before recoating. Apply 1 coat vertically. Let it dry then apply second coat horizontally.
For areas with substantial movement such as roof decks with (AHU) or other machinery, apply with waterproofing fiber cloth. Apply 1 coat of Primero Pro Deck vertically. While still wet, lay fiber cloth into the paint. Use the brush to push fiber cloth firmly onto the paint, squeezing out air bubbles to eliminate creases. Let it dry for 2 to 3 hours then reapply second coat horizontally. You may apply a third coat vertically for better coverage and protection. It is recommended to apply 1 to 2 square meters at a time so that paint will not dry while applying fiber cloth. This will increase tensile strength. Allow 12 to 24 hours for foot traffic and 3 days for full cure.
For old walls, remove any loose or flaking paint. Sand surface to rid of efflorescence and apply wall putty or new cement plaster for areas with deep cracks. Let it dry and apply Primero Pro-Deck with the same instructions above.
DRYING TIME:
3 to 4 hours to recoat
12 to 24 hours hard dry
2 to 3 days for full cure
COVERAGE:
4kg: 4-5 sq. meters (2 coats)
25kg: 25-28 sq. meters (2 coats)
1kg/sq. meter (2 coats)