PYE PRUF-SEAL 50
FLEXIBLE CEMENTITIOUS WATERPROOF COATING
PACKING: 4KG/ 2L | 20KG /10L
PYE PRUFSEAL 50 is a two component flexible cementitous waterproofing system with an elongation break at 50%. It is applied as slurry and dries to form a membrane that is permeable to vapour but a barrier to water and moisture. PYE PRUFSEAL 50 has exellent adhesion to concrete or other cementitious based surfaces.
Suitable for:
- Bathroom and Toilet
- Kitchen Area
- Roof Gutter
- Balcony
- Terrace
- basement
- Water Tank
- Swimming Pool
Product Characteristics:
| Solids | :Cement, Aggregate & Filler |
| Admixture | :Acrylic COpolymer |
| Potlife | : 1 Hour |
| Elongation | :50% at break |
| Tensile Adhession | :>0.5N/mm² |
| Thickness | :1 -1 1.5 mm per coat |
| Coverage | Approx. 1.7 kg/mm²/mm |
| Safety | :Non-Hazardous :Non-Flammable |
| Cleaning | :Clean tools with water |
Storing:
PYE PRUFSEAL 50 has a shelf life of 6 months, if kept in a dry and cool condition.
Packing:
1. Part A – 4kg, Part B – 2 liters
2. Part A – 20kg, Part B – 10 liters
Directions for Use:
Surface Preparation
Substrate must be clean, free of dust, oil, paint, grease or any loose materials. A high-pressure air or water jet is recommended for this rocess. The substrate must be prewetted but over wetting resulting in accumulation of water on the surface should be avoided.
Mixing
Add the entire 20kg bag of Part A to 10 liter of Part B. Use a power drill to mix thoroughly until a slurry consistency is achieved. Avoid high speed or excessive mixing to avoid entrapped air into the mix.
Application:
PYE PRUFSEAL 50 is to be applied in two coats with a minimum thickness of 1 mm for each coat. Apply using a trowel or a stiff brush. The first coat must be at least semi-cured (touch dry) before the application of the second coat.
PYE PRUF-SEAL 50
FLEXIBLE CEMENTITIOUS WATERPROOF COATING
PACKING: 4KG/ 2L | 20KG /10L
PYE PRUFSEAL 50 is a two component flexible cementitous waterproofing system with an elongation break at 50%. It is applied as slurry and dries to form a membrane that is permeable to vapour but a barrier to water and moisture. PYE PRUFSEAL 50 has exellent adhesion to concrete or other cementitious based surfaces.
Suitable for:
- Bathroom and Toilet
- Kitchen Area
- Roof Gutter
- Balcony
- Terrace
- basement
- Water Tank
- Swimming Pool
Product Characteristics:
| Solids | :Cement, Aggregate & Filler |
| Admixture | :Acrylic COpolymer |
| Potlife | : 1 Hour |
| Elongation | :50% at break |
| Tensile Adhession | :>0.5N/mm² |
| Thickness | :1 -1 1.5 mm per coat |
| Coverage | Approx. 1.7 kg/mm²/mm |
| Safety | :Non-Hazardous :Non-Flammable |
| Cleaning | :Clean tools with water |
Storing:
PYE PRUFSEAL 50 has a shelf life of 6 months, if kept in a dry and cool condition.
Packing:
1. Part A – 4kg, Part B – 2 liters
2. Part A – 20kg, Part B – 10 liters
Directions for Use:
Surface Preparation
Substrate must be clean, free of dust, oil, paint, grease or any loose materials. A high-pressure air or water jet is recommended for this rocess. The substrate must be prewetted but over wetting resulting in accumulation of water on the surface should be avoided.
Mixing
Add the entire 20kg bag of Part A to 10 liter of Part B. Use a power drill to mix thoroughly until a slurry consistency is achieved. Avoid high speed or excessive mixing to avoid entrapped air into the mix.
Application:
PYE PRUFSEAL 50 is to be applied in two coats with a minimum thickness of 1 mm for each coat. Apply using a trowel or a stiff brush. The first coat must be at least semi-cured (touch dry) before the application of the second coat.